Ваша страна ?

Manufacture and sales geosynthetic materials in Russian Federation
Home » Glass Geoflax geogrid


order

Glass Geoflax geocell

Bonded (impregnated glass geocell SSP) or quilted (impregnated quilted glass geocell SSNP) geocell is made of fiberglass rovings and impregnated with bitumen.
A road geocell takes up a portion of the temperature and transport loads on the operated road, slows down crack propagation in the existing pavement, stabilizes shoulders and slopes, protects and stabilizes layers in building structures.

Scope of application:

● Strengthening and reinforcement of pavement joints
● Protection against damage due to weather and operational changes
● Inhibiting of crack propagation and road repair
● Preventing of rutting due to permanent traffic loads

Advantages of glass Geoflax geocell

1.Saves up to 45% on investment in construction, increases the turnaround time during operation, reduces amount of construction materials by 30% and, at the same time, provides good road quality

2.Due to the low parameter of elongation, glass geocell takes up the loads immediately after installation.




Physical and mechanical properties of glass Geoflax geocell

Parameter 50/50 70/70 80/80 100/100 120/120
Raw material Fiberglass
Cell size, mm 25×25; 37.5×37.5; 50×50
Surface density 300 370 420 470 570
Tensile strength, kN/m, at least          
– lengthwise 50 70 80 100 120
– crosswise 50 70 80 100 120
Relative elongation at maximum load,%, no more than:          
– lengthwise 3.0 3.0 3.0 3.0 3.0
– crosswise 3.0 3.0 3.0 3.0 3.0
Heat-resistance, % at least 90 90 90 90 90
Providing material flexibility of a 20 mm radius test bar at a temperature of minus 10 °С without defects
Frost-resistance (30 cycles), %, at least 90 90 90 90 90
Resistance to corrosion environment, %, at least 80 80 80 80 80
Resistance to ultraviolet radiation, %, at least 95 95 95 95 95
Resistance to fungi, no higher than PG113 PG113 PG113 PG113 PG113

 

    Выбрать страну