HDPE and LDPE Geoflax geomembrane
HDPE and LDPE Geoflax geomembrane is a smooth insulating web material made of extruded polyethylene 0.5 to 4 mm thick. The maximum width of our geomembrane may reach 5 m. This geosynthetic material is placed on a site where 100% waterproofing is required or where passage of a fluid flow through its structure needs to be reduced.
The joints between the adjacent sheets are welded using dedicated machines, and the entire surface becomes leak-tight.
Scope of application
● Waterproofing of foundations, roofs, banks and reservoir bottoms
● Protection of soils and road pavement materials against silting by groundwater
● Strengthening of road shoulders in lowlands and other wet road sections
● Reinforcement and load distribution on soil
● Waterproofing of operated ballasted roofs, living walls in landscape design
Advantages of HDPE and LDPE Geoflax geomembrane:
1.Saves up to 30% on conventional waterproofing materials.
2.Saves up to 25% on labor costs related to conventional waterproofing construction methods.
3.Has a higher density due to the catalytic treatment so that this material can be used to isolate even very toxic waste.
|Melting index – 190/2, 16 g/10 min.||<1.0||<1.0||<1.0||<1.0||<1.0||<1.0||<1.0||<1.0||<1.0|
|Membrane density, g /cm3||>0.944||>0.944||>0.944||>0.944||>0.944||>0.944||>0.944||>0.944||>0.944|
|Relative elongation to yield strength, %||>12||>12||>12||>12||>12||>12||>12||>12||>12|
|Resistance to tension cracking 0(NCTL-test), h||>400||>400||>400||>400||>400||>400||>400||>400||>400|
|Resistance to cracking, h||2000||2000||2000||2000||2000||2000||2000||2000||2000|
|Yield strength lengthwise/crosswise of 0web, MPa, at least||27/27||27/27||27/27||27/27||27/27||27/27||27/27||27/27||27/27|
|Relative elongation at rupture 0lengthwise/crosswise of web, %, at least||700|